4A-GE MK1 Engine Fuel rail crush washers [Archive] - Toyota MR2 Message Board

4A-GE MK1 Engine, fuel, washers, banjo, close, found, funky, shaped, filed, ideal, solution, washer, toyota, supposed, seal, figure, dealer, crush, rail, paid, road, appreciated, back, copper, link, feel, room, flow, sits, https://dl.dropboxusercontent.com/u/87337798/2013-10-22%2016.29.01.jpg, shows, works, insisted, needed, demonstrates, setup, google, search, banjo-, image, bolt, holes, show, itself-, http://repairguide.autozone.com/znetrgs/repair_guide_content/en_us/images/0900c152/80/04/65/f7//small/0900c152800465f7.jpg, middle, insight, compensate, inside, destroyed

After waiting a week to get the crush washers in from the dealer for the fuel rail (none of the local shops had anything close, and it leaked with anything I tried) I found out that the fuel damper on the #1 side of the manifold was defective. I happened to have a spare, but before I found out I overtightened the darn thing and destroyed one of the washers. To compensate, I took one that was close and filed out the inside until it was the right ID- and then filed notches in it so fuel